Construction chemicals
& technologies.

Calcium aluminate cements

Listed for work that cannot wait on a conventional set, and for exposure that ordinary cement chemistry is not asked to carry. The profile names three characteristics: rapid setting and quick repairs, high temperature resistance, and chemical and acid resistance.

Typical setting is an industrial asset that needs to return to service, or a chemically aggressive environment in a mine, processing plant or piece of infrastructure. Greenlink does not publish set times, temperature limits or acid-concentration ratings on this page — those belong to the specific specification.

Construction technologies overview · Mining

Refractory linings

Named for furnace and kiln protection, with thermal insulation systems listed alongside. The problem they address is heat and the lining that has to survive it — not a general coating duty.

Use is therefore tied to hot industrial equipment. If the requirement is chemical splash rather than temperature, acid proofing or protective coatings are the closer families on this page.

Protective coatings

The profile lists acid-resistant epoxies and corrosion protection systems. The duty is to keep an aggressive environment off the substrate — acid exposure on one side, corrosion on the other.

They sit next to rubber lining and acid-proof brick where the asset is a tank, pipe, floor or structure in a processing plant. The right build-up depends on the chemical, the temperature and the substrate, which is a technical conversation rather than a catalogue choice.

Rubber lining systems

Listed for tanks, pipes and vessels, where the lining has to resist abrasion and corrosion. That is a containment and transfer duty: the surface that sees slurry, chemical or mechanical wear.

Rubber lining is distinct from a painted coating and from a brick lining. If the asset is a vessel or pipe rather than a furnace, start here and confirm the exposure with the technical team.

Rapid repair & installation technologies

This family is named in the construction range. The company profile does not give it a separate set of performance notes — the lines beside it repeat the tank, pipe and abrasion notes used for rubber lining, so they are not treated here as a specification.

Application is confirmed against the asset. Calcium aluminate cements are the family on this page that explicitly lists rapid setting and quick repairs.

Acid proofing systems

Acid-resistant bricks and mortars, and chemical-resistant linings. The problem is sustained acid or chemical contact, typically on floors, channels, bunds and process structures where a thin coating is not the intended system.

In a mine or processing plant this is often the difference between a surface coating and a built lining. The profile does not publish brick grades or mortar chemistry; those are specified to the chemical and the temperature.